AT50SPT
Motorized Hydraulic Press Power 50 TON with Metal Mesh Perimeter Protection.
Max Capacity (Ton)
Weight (Kg)
Max Pressure (Bar)
Cylinder Stroke (mm)
50 ton hydraulic press with metal mesh perimeter protection.
Micro that is activated when the door is open. Fixed rear protection in stove-painted steel.
This protection must be mounted in processes where there is the possibility of pieces being ejected. It is a front protection with an access door that can be opened and with a safety micro that prevents the use of the press when the door is not closed. Protection fixed on the pallet.
MAIN FEATURES
| Max Capacity (tons) | 50 |
|---|---|
| Approaching speed in fast mode(mm/min) | 1750 |
| Approaching speed in slow mode(mm/min) | 320 |
| Cylinder stroke (mm) | 300 |
| Stem diameter (mm) | 70 |
| Shank diameter (mm) | M30 |
| Max power absorbed (A) | 5,5 |
| Max pressure (bar) | 350 |
| Tension (V) | 400 |
| Frequency (Hz) | 50-60 |
| Motor Power (kW) | 3 |
| Weight (Kg) | 500 |
Technical drawing
AxA Group produces a complete range of OPTIONALS and ACCESSORIES:
- plates, V-prisms, milled and T-slot worktops
- front and rear perimeter guards
- up and down limit switch microswitch
- RAPID/SLOW control system for operating the press with one hand within the limits set by current legislation
- switchboards for automatic presses with PLC
- increased cylinder rod strokes
All our presses are always accompanied by a user and maintenance manual, CE marking and a certificate of conformity in accordance with the current machinery directive and workplace safety directives.
Our hydraulic presses are manufactured with the highest construction quality and guarantee unlimited reliability.
50 ton hydraulic press with metal mesh perimeter protection.
Micro that is activated when the door is open. Fixed rear protection in stove-painted steel.
This protection must be mounted in processes where there is the possibility of pieces being ejected. It is a front protection with an access door that can be opened and with a safety micro that prevents the use of the press when the door is not closed. Protection fixed on the pallet.
Request more information
Why choose an hydraulic press for your workshop? The advantages that make the difference
Hydraulic presses offer a package of benefits that clearly distinguish them from alternatives such as mechanical or pneumatic presses.
-
-
- Maximum Strength with Minimum Effort: Thanks to the hydraulic principle, you can generate immense pressures with a contained thrust, optimizing energy efficiency and operator fatigue.
- Total Control over Strength and Speed: The ability to fine-tune fluid pressure or pump flow gives you precise, variable control over both the force and speed of each operation. This means adaptability to any type of processing.
- Uniform and Constant Pressure: Forget jolts and vibrations. The applied force is distributed evenly over the entire surface of the piece, ensuring flawless results and reducing the risk of defects.
- Unmatched Flexibility: The very nature of the hydraulic fluid and the wide availability of molds and tools allow you to work with materials of different shapes and sizes, making the hydraulic press extremely versatile for your production needs.
-
Versatile Applications at the Service of Your Production Processes
When it comes to strength and precision in shaping materials, the hydraulic workshop presses produced by AxA Group S.r.l. are the solution by excellence. These machines, fundamental pillars in countless sectors, exploit the invisible power of a pressurized fluid to perform a vast range of processes on solid materials: from deformation to bending of sheet metal, from cutting to assembly, from engine repairs to straightening of deformed materials.
